Installing Noodoe EV's

AC22P EV CHARGER

Going from shipment to operational takes only three steps. Install the charger. Activate it. Subscribe to Noodoe EV OS using the site owner’s credentials (required for operation).

HOW TO INSTALL YOUR AC22P CHARGER

Run through the pre-installation checklist

Make sure you have everything in the box

Read the User Manual and get everything mounted

Set up internet connection

Power up your charger!

Pre-Installation Checklist

A qualified technician should install the AC charger according to the user manual and local safety regulations.
Do not use this product if the enclosure or the charging connector is broken or open or if there is any damage.
Do not use this product if the power cable or the charging cable is damaged.
Power feed must be a 3-phase Wye configuration with TN(-S)/IT/TT grounding systems.
In the installation of TN(-S) system: the neutral (N) and the PE of the power distribution are directly connected to the earth. The PE of the charger equipment is directly connected to the PE of power distribution and have separate conductors for PE and neutral (N).
In the installation of IT system: the neutral of the power distribution system is isolated from the earth. The PE of the charger equipment is isolated to the PE of power distribution to the earth.
In the installation of TT system: the neutral (N) and the PE of the power distribution are directly connected to the earth. The PE of the charger equipment is isolated to the PE of power distribution to the earth.
The capacity of the power supply should be higher than 28 kVA in order to function correctly.

Recommended Tools

Wire stripper
Crimpers for ring terminals
Phillips screwdriver for M4 ~ M6
1-3/8 inch or 34 mm drill bit
Voltmeter or digital multimeter (for measuring AC voltage at the installation site)
The inserting cable should meet the best waterproof performance. It is recommended to use a 5 core / 8 AWG or 8 mm2 -10 mm2 cables (XLPE-90 °C, THHN-90 °C, or equivalent) to pull the cable from the distribution box. The maximum outer diameter of the cable should be 16 mm – 23 mm.
Level ruler
Pencil or marker
Machine drill
Ring terminal (recommend type 8-4) for 8 AWG wire, and fixed by M4 slotted head screw
Slotted head screwdriver for M4

installation

Follow the instructions in the User Manual to complete the installation of the EV charging stations.

internet connection

Noodoe EV charging stations require internet connectivity to complete charger activation and to provide charging services. 
If using Wi-Fi, a high-quality commercial-grade 4G router is required for stable operation of the charging stations.

A consumer router will freeze after a few months and require a reset. Commercial-grade routers are designed for years of continuous operation under harsh conditions. Additionally, they can auto-reboot should the routers stop working. This ensures dependable, automated service. Please contact your Noodoe EV representative or distributor if you require help with obtaining a commercial-quality Noodoe-certified 4G router.

Powering On

After all the electrical work has been completed and the Ethernet cable has been plugged in, you can power up the charging station by turning on the breaker.

Continue to Activation

Need Help?

If you’re still experiencing issues or would like to ask any questions specific to your installation, please reach out through our FAQ or by submitting a request for support.